DataLink GW1000 Ethernet and DF1 Converter to Allen-Bradley's Datahighway Plus DH+

 DataLink Technologies GW1000 is an extraordinary minimal expense elective entryway converter choice to Allen-Bradley's Datahighway Plus DH+ and DH-485 Network Communications cards including the 1784-U2DHP, 1784-PCMK, 1784-PKTX, 1784-KTX, 1770-KF2, and the 1770-KF3. Large numbers of these DH+/DH-485 Communications converter cards are currently old as PC innovation has progressed and AB presently suggests the outer link arrangement of the 1784-U2DHP for most AB Datahighway Plus and DH-485 applications.

 

The DataLink Technologies GW1000 converter is a prevalent option with its most well known feature including an adaptable stage that permits clients in the field change conventions between DF1, ASCII, Modbus, ModTCP, AB Ethernet or Ethernet/IP to message with any hubs on DH+.

 

Another mainstream component of the GW1000 is its convenience in modern applications needing to convey between the most current Allen Bradley Ethernet PLCs to Legacy Allen-Bradley DataHighway Plus and DH-485 Networks. This permits production lines to spending plan in an Ethernet change choice to a current DH+ manufacturing plant setting. In fostering this converter arrangement, DataLink designed it as a multiprotocol converter and included conventions like DF1, Modbus, ASCII and ModTCP Ethernet to AB's DH+ and DH485.

 

Probably the most widely recognized applications between AB Ethernet and Ethernet/IP to Datahighway Plus DH+ and Datahighway 485 include:

 

SCADA/MMI/Programming Software - RLSINX/LOGIX/VIEW, Wondware, Kepware, Citect, Intellution, et. all bundles perusing/composing information to and from any hubs.

 

Permitting any AB Ethernet and Ethernet/IP PLC as Master - models include: Controllogix, SLC 5/05, MicroLogix, SLC 5/05, CompactLogix, FlexLogix, PLC-5E to send either peruse or compose message orders to any DataHighway Plus PLCs which incorporate SLC 5/04s and PLC-5s.

 

DataLink GW1000 designing was numerous years really taking shape and came from our clients demands dependent on restrictions found in AB Interface cards. The most widely recognized solicitation was for an AB Ethernet/IP door to Legacy AB Networks including Datahighway Plus and Datahighway 485 DH-485.

 

DataLink Technologies GW1000 one box door arrangement is offered at a low cost of $1,250 USD. This systems administration door has comparative component behaving like a small Controllogix Ethernet to DH+ Gateway. On the other hand it very well may be changed to numerous sequential conventions offering the usefulness of DF1, ASCII, Modbus to AB's DataHighway Plus and AB's DH-485.

 

DataLink GW1000-ABEIP or GW1000-DHP1 are an extremely mainstream option in contrast to out of date Allen-Bradley organizing door so­­­­­­­lutions including 1784-U2DHP, 1770-KF2, 1770-KF3, 1784-KTX, 1784-PKTX,

 

DataLink GW1000 can interface a large number of Allen-Bradley's freshest Ethernet/IP PLC gear to heritage Datahighway Plus and DataHighway 485 Networks. Allen-Bradley Ethernet PLCs incorporate SLC 5/05,Panelview Plus,PLC5 E, Controllogix 1756-DHRIO and 1756-ENET, Flexlogix, Micrologix and Compactlogix.

 

DataLink Technologies GW1000 DH+/DH-485 designing quality and dependability can be trusted with a large number of GW1000 in industrial facility applications all throughout the Planet. The GW1000 accompanies a multi day preliminary and long term guarantee on all GW1000 items. This DataLink GW1000 convention converter is an extraordinary answer for interfacing Legacy DH+/DH-485 to more current Ethernet advances. If it's not too much trouble, contact DataLink at 360 306-5878 to additionally examine your application subtleties.

 

For more info:- Allen-Bradley 1762-IF4

 

Allen-Bradley 1734-IB8S

 

Allen-Bradley 1746-OW16

 

Allen-Bradley 1769-IA16

Comments

Post a Comment

Popular posts from this blog

About Allen-Bradley 1769-IF8 Equipment for the Industrial Environment

  The Allen-Bradley 1769-OF4 module is an analogue output module that produces voltage/current signals. This module has Four (4) single-ended outputs, with an output voltage range of 0 to 10 volts and 0-20 mA. The modules resolution is 15-bit unipolar/bipolar with a draw current of 120 mA at 5.1 Volts. The module’s maximum cooling rating of two.86 Watts and a 3.8-millisecond interruption-enabled maximum conversion rate. The 1769-OF4 module features a 2.9-millisecond step response rating of 63% and a resistivity load of 0 to 600 Ohms of current or 1 KOhms; or greater of voltage. The 1769-OF4 features a maximum inductive load of 0.1 mH of current load and 1.0 µF of voltage load. it's an accuracy margin of 0.5% (full scale at 25 degrees Celsius), and an output ripple of 0.05% at 0 to 50 kilohertz.   This analogue output module has an accuracy drift of 0.0086% (per degree Celsius) and a non-linearity margin of 0.05%. It also features a module error margin (at 0 to 60 degrees Cel...
Read more

Tips for Allen-Bradley instrument panel Design

  DMC has extensive experience programming, commissioning, and designing control panels with Allen-Bradley hardware. During the planning process, we will help guide hardware selection and make sure that each component is wired properly, taking advantage of Rockwell controls features. This blog highlights a number of our favourite Allen-Bradley hardware and the way to use it. ControlLogix When working with ControlLogix, remember there are different communication modules counting on the model. the newest ControlLogix PLCs (5800 series) have embedded EtherNet/IP Ports where the previous designs (5700 series) didn't . due to this, an older model may have additional communication cards added, which could lead on to losing a slot where you'd want a further module. It is important to think about future expansions when choosing the rack/chassis size. Expanding to additional chasses would require another power supply, communication module, and chassis. Further, always remember to see al...
Read more

About Allen-Bradley 1769-IF8 Equipment for the Industrial Environment

Image
  The Allen-Bradley 1769-OF4 module is an analog output module that produces voltage/current signals. This module has Four (4) single-ended outputs, with an output voltage range of 0 to 10 volts and 0-20 mA. The module's resolution is 15-bit unipolar/bipolar with a draw current of 120 mA at 5.1 Volts. The module’s maximum cooling rating of two.86 Watts and a 3.8-millisecond interruption-enabled maximum conversion rate. The 1769-OF4 module features a 2.9-millisecond step response rating of 63% and a resistivity load of 0 to 600 Ohms of current or 1 KOhms; or greater of voltage. The 1769-OF4 features a maximum inductive load of 0.1 mH of current load and 1.0 µF of voltage load. it's an accuracy margin of 0.5% (full scale at 25 degrees Celsius), and an output ripple of 0.05% at 0 to 50 kilohertz.   This analog output module has an accuracy drift of 0.0086% (per degree Celsius) and a non-linearity margin of 0.05%. It also features a module error margin (at 0 to 60 degrees Celsi...
Read more